Repairing a swimming pool that has turned green? This article will also cover some simple chemistry and filtration ideas to prevent this from happening again. According to HackRea, as long as there is enough free chlorine from the ocean, algae will have trouble forming. If the chlorine can’t build up in a big way, algae will grow. That’s why you’ll agitate your pool with chlorine during part of the six-step procedure below.
Check the Pool’s Green Level
Determine if the water chemistry is fixable or too advanced. Test the water to determine the pH balance. Because if it’s too green, these steps won’t be enough; you may need to drain the pool and acid wash it instead of treating it with shock. In acute cases, it’s cheaper and much less expensive this way than simply draining the pool and washing it with acid, although it will cost money to refill it. This article is the general guide to determining if it can be treated or needs to be drained. If you are willing to look at least six to eight inches below the water surface, it can probably be fixed. After determining that the pool does not need to be drained and can be treated, we can proceed from that point.
Test the Water
If the pool is green, there are obviously few, if any, contaminants in the pool, and if you’re most likely agitating the pool, you’ll be adding a lot, so chlorine testing isn’t too relevant. But you should test the pH because if the pH is too high, the shock will foul the pool. To test pH, use a high-quality test kit, affordable test strips will give you a fantastic idea of your pH is high or low. You want it lower: 7.2 or maybe less.
Shake the Pool
I suggest purchasing a 25-pound box of granular chlorine instead of the one-pound packs they trade at the pool or large stores. You’ll conserve a lot of cash, and in the long run, you’ll need the chlorine to buy smaller portions from time to time. Keep the chlorine flowing evenly through the water along with the filter pump so that the entire pool is covered until the five pounds of shock, about ten gallons of liquid contaminant, is used up. Also, be sure to use an excellent algaecide to add after several hours of current.
Brushing and Fix the Pool
After 24 hours of flow and connections, you will notice this comprehensive transformation. Your pool should no longer be green. But it will likely continue to be murky and will need a fantastic amount of cleaning and purging over the next few days. There will probably still be isolated, stubborn green spots that need a little cleaning. If you get a sand filter, then it will take a week or more. If you have a diatomaceous earth filter and the cloudiness doesn’t go away, then your filter may be clogged and needs to be checked or repaired.
Maintain Pool Balance
Make sure you have a reliable chlorine system, whether it’s in-line, float, or salt; chlorine should be in the pool regularly. Pouring a jug of liquid once a week is not a great way to keep your pool in tip-top shape. A simple floating tablet is too strong. Use a water maintenance solution. Diatomaceous earth filters are certainly the ideal filter to get. Although they are a bit more expensive to purchase at first, they will help you save time and a lot of money in the long run. Learn more about the best way to wash a cartridge filter here. Soak in trisodium phosphate every three weeks.…
