Garage door maintenance is often overlooked. But by making inspections and maintenance part of your routine, you can reduce the chance of certain problems. Unless you have serious trouble, you can have your garage door repair in Greensboro. In this post, we will share some of the essential maintenance tips for garage doors.
Watch and Listen to the Door in Operation
A well-maintained and well-adjusted garage door are relatively quiet when going up and down, and you shouldn’t notice any jolts in its movement. Look at each side of the machine – both springs, rollers, and cables – and make sure they appear symmetrical. Regarding this, examine the tracks on both sides of the door to make sure they are free of debris and rust.
You can use a horizontal to make sure the rails are plumb (perfectly vertical) along with their vertical sections. You can probably make small changes, but big changes to the monitor are a project that should be left to a professional technician.
Assess the Balance of the Garage Door
If your garage door is poorly balanced, the door opener tends to work harder, and it won’t last as long. The door should be so well balanced by its springs that it only takes a few kilos of force to lift it. You can test it by pulling the release handle on the automatic opener, then lift the door so it is about halfway open. The door should remain in place without your help. If this is not the case, the door is unbalanced or the springs are old and worn. Call a professional to help you with the springs.
Evaluate the Automatic Reverse Feature
Automatic garage door openers should have an auto-reverse quality that is designed to stop and reverse the path of the door when it encounters an object in the path of the door or collides with an object while the door is closing. This system is activated by a pressure sensor or a pair of photocells on each side of the door. Look closely at the pressure sensor by placing an old 2×4 horizontally on the floor in the path of the door. Observe the photoelectric system with eye sensors on each side, then start the door in a final direction and walk with only your leg in the door path.
The door should reverse direction and go up. Consult the instruction manual of your garage door opener to find the best way to solve the automatic reversal problem. Old garage door openers that lack this simple feature, now required by building regulations in many places, should be replaced.
Lubricate the Moving Parts
By keeping the moving parts (such as the roller) lubricated, will minimize pressure on the rollers and door openers and would prolong their use. It is advisable to apply spray lubricant like white lithium grease twice a year. If the clamps or hinges appear to be stuck, spray them with a penetrating option, such as WD-40, and then wash off the dirt. Also, lubricate the pulleys and the bearings on torsion-spring openers. And, if the opener has a metal chain, use white lithium grease on the opener’s screw, except for the belt-drive opener.
